MediaLight Pro2 CRI 99 6500K White Bias Lighting 1 – 6 Meter

Add to wishlistAdded to wishlistRemoved from wishlist 0

MediaLight Pro2 Specifications  :

  • 6500K CCT (correlated color temperature) simulates D65
  • CRI 99 Ra (TLCI 99.7 Qa) Chip ColorGrade™ MPro2 SMD (LED)
  • Length 1-6 meters.
  • Version 1-4m can work on USB 2.0 or USB 3.0 (minimum 500mA).
  • 5-6m models can be powered by USB 3.0 (minimum 900mA).
  • Maximum brightness ~300 lumens included (for 3-6 m) and (~200 lumens for 1-2 m) for applications that require higher brightness (i.e. not for lighting applications). General Bias) Consider our  MediaLight Pro2 24 Volt product, which has 800 lumens per meter of brightness.
  • 8mm 2 Pin Pure Copper PCB Strip
  • Includes flicker-free dimmer (note:  not  remotely controlled)
  • USB power 5v
  • Includes wire routing clips. 
  • Peel and stick 3M VHB installation adhesive.
  • 5 year limited warranty

฿ 2,750.00฿ 9,990.00

  • USD: 74.73$ - 271.47$

Size Chart

For displays larger than 90″, where 4-sided lighting is desired, we recommend placing the strip 3 inches from the edge, rather than 2 inches.  This is so that you don’t run out of LEDs before you get around 4 sides.

Please read if following the guidelines for “Display on a stand”:
It’s costs a bit less to use a shorter strip, but people have complained that the “halo” looks too diffuse when the lights are further from the edge of the display. This doesn’t make the lights less effective, but you have fewer options and the strip might be too short for some configurations. You will have more options if you choose the sizes in the 3 and 4-sided recommendations.The shorter configuration still works for the 1m MediaLight Pro2 with a display up to 46”. This is because, on a smaller display, the light from the different sides combines more evenly when the display is on a stand. (This is also why 3 sides will provide sufficient light for the bottom of the computer monitor. The left and right sides are still very close together compared to larger displays).

MediaLight Pro2
sets a new standard in precision and convenience.

Please note: If you are not a professional colorist, photographer, or video editor, you may want to consider  the Mk2 Series  or  LX1  instead.

The MediaLight  Pro2 Bias Lighting System  was created for directors, editors, and colorists who require the highest CRI and most even spectral distribution in bias lighting for professional displays. 

Pro2 uses a new class of ColorGrade™ MPro2 SMD (LED) chips, powered by a blue-violet emitter that virtually eliminates the blockage of  LED emitters, with an incredible Color Rendering Index (CRI) of 99. Ra, TLCI 99.7 Qa, and a Spectral Similarity Index (SSI) of 88.  The included flicker-free dimmer  operates at 30KHz (30,000 Hz vs. 220 Hz for other MediaLight dimmers — and yes  We sell dimmers separately. so you can add it to your existing setup — but keep in mind that you don’t need to add a single switch to this unit, as a  flicker-free dimmer is included. already) 

The Pro2 doesn’t have a remote control  , but instead has a top-quality, flicker-free dimmer. You can request to add a remote dimmer switch to your order.  Free of charge  But you will cancel the flicker-free dimming function. We hope to offer a remote option in the future. But for now, SPD and temporary workarounds prevail over remote convenience. If you want a free remote and dimmer switch Please email us your order ID and display model. This is important to avoid infrared remote control interference with other devices. 

In case you haven’t heard of SSI before, it’s a comparison of a light source to a reference illumination. In this case, CIE D65 standard lighting. It compares the spectral power distribution (SPD) of a light source to the SPD curve for D65. For comparison’s sake, the very accurate MediaLight Mk2, which has a CRI of 98 Ra, has an SSI of 70. At the time of this writing, the MediaLight Pro2 offers the highest SSI available for a production LED light source. 

 

 

Most commodity LED lighting systems are missing an R9 value, which is not included in CRI calculations but is necessary for realistic reproduction of skin tones and deep reds. They are often replaced by green phosphors that are much more energy efficient and cheaper. This may result in a distorted green color. Even when used to illuminate gray surfaces, such as in the case of bias light.

In addition to the blue-violet photon mechanism This eliminates the blue overtones.  MediaLight Pro2  also uses a special blend of these important red phosphors, resulting in much smoother SPD and more natural lighting.

This is the emitter value increase for the original MediaLight Pro (because brightness is relative You’ll notice how the increased value of the emitter on the left obscures the rest of the spectrum):

 

Note:  There are a lot of people who are naturally interested in the most expensive products on this website. Although as a business We appreciate some unique aspects of consumer behavior. But we want to let you know that everything we sell on this site, from the $15 LX1 Bias Light to the most expensive MediaLight Pro, is certified for accuracy at Levels that not only meet but  also exceed  industry standards (SMPTE, ISF, CEDIA)

TL;DR: Everything on this website can be used in a professional environment. 

Why create a new product like MediaLight Pro2?

1) This is because vision varies from person to person and often improves over time. The more time we spend with a piece of technology, Be it a monitor, a camera or a light source. The more familiar we become with its strengths and shortcomings.

When 720p and 1080p TVs first hit the market Some people compare viewing a 1080p image to looking out a window. Right now we’re looking beyond 4K. 

2) Because products like MediaLight Pro2 predict advances in lighting technology And where do we need to be as a bias lighting manufacturer in the next 3-5 years, even if we can’t reach mass market prices yet?

Just like the now defunct MediaLight Pro v.1 made the hugely popular MediaLight Mk2 series possible. Our goal is to incorporate what we learned from Pro2 into all of our products. 

Specification: MediaLight Pro2 CRI 99 6500K White Bias Lighting 1 – 6 Meter

Meters

1 Meter, 2 Meters, 3 Meters, 4 Meters, 5 Meters, 6 Meters

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “MediaLight Pro2 CRI 99 6500K White Bias Lighting 1 – 6 Meter”

Your email address will not be published. Required fields are marked *

medialight-sea
Logo
Shopping cart